EU NIAN - Your world class plywood consultants from Malaysia

SYN-PH Fully Auto Conveyor Synchroniser

Main Features
  • Synchronise between controlled-driver speed and main-driver Speed
  • Uses high precision speed control system to ensure the veneer is always in normal position, and cause no veneer split during high speed operation!
Introduction

SYN-PH Fully Auto Conveyor Synchroniser – as it is named – is a simple but highly innovative product that synchronized between two drivers speed. The typical applications of this system are:

  • Speed synchronisation between Unreeling Mechanism (known as controlled-driver) and Dryer Input Conveyor (known as main-driver).
  • Speed synchronisation between Dryer Output Conveyor (known as controlled-driver) and Dryer Net (known as main-driver).
  • Speed synchronisation at Green Clipper section.

The key advantages of this system are:

  • Decrease veneer split problem

  • Increase machine efficiency

  • Improve veneer quality
  • Reduce overall production cost

Specification
Model

SYN-PH
Power Supply Source Voltage  Single phase 220 VAC
Power Rating 120 Watt
Input Main Drive TG Voltage 10 ~ 140V @ max.speed VAC/VDC

Pole

24 and above

 Pole
Output Voltage (max) 12 VDC
Current (max) 30 mA
Load Resistance 500 (minimum) Ohm
Controlled-Driver Motor Motor Type DC/AC/VS/DL/PS  
Speed Range 0 ~ 65 m/min
Panel Dimension W x H x D 190 x 120 x 330 mm

 

Ordering Information
Product Code Description
SYN-PH Fully Auto Conveyor Synchroniser
Spare Parts  
EN-SYN-PHB1 SYN-PH Power Supply Card
EN-SYN-PHT1 SYN-PH Main Control Card
EN-SYN-PHLED SYN-PH Indicator Display Card
EN-SYN-PHTR SYN-PH Transformer P:220, S:15/0/15
EN-SYN-PHT125 SYN-PH Power ON Switch
EN-ASN-311 Selector Switch
EN-XS60 Photo Electric Sensor
EN-TG48 Tachogenerator
EN-P40 Veneer Position Potentiometer (1-Kohm)
EN-P40 Correction Adjuster Potentiometer (1-Kohm)