|
SYN-PH Fully Auto Conveyor Synchroniser |
|
|
|
Main Features
|
- Synchronise between controlled-driver speed and
main-driver Speed
- Uses high precision speed control system to ensure the
veneer is always in normal position, and cause no veneer split
during high speed operation!
|
|
Go to Top ^ |
|
|
|
|
|
Introduction |
|
 SYN-PH
Fully Auto Conveyor Synchroniser – as it is named – is a simple
but highly innovative product that synchronized between two
drivers speed. The typical applications of this system are:
-
Speed synchronisation between Unreeling Mechanism (known as
controlled-driver) and Dryer Input Conveyor (known as
main-driver).
-
Speed synchronisation between Dryer Output Conveyor (known as
controlled-driver) and Dryer Net (known as main-driver).
-
Speed synchronisation at Green Clipper section.
The key advantages of this system are:
|
|
Go to Top ^ |
|
|
|
|
|
Specification |
| Model |
SYN-PH |
| Power Supply |
Source Voltage |
Single phase 220 |
VAC |
| Power Rating |
120 |
Watt |
| Input
|
Main Drive TG |
Voltage |
10 ~ 140V @ max.speed |
VAC/VDC |
|
Pole |
24 and above |
Pole |
| Output |
Voltage (max) |
12 |
VDC |
| Current (max) |
30 |
mA |
| Load |
Resistance |
500 (minimum) |
Ohm |
| Controlled-Driver
Motor |
Motor Type |
DC/AC/VS/DL/PS |
|
| Speed Range |
0 ~ 65 |
m/min |
| Panel Dimension |
W x H x D |
190 x 120 x 330 |
mm |
|
|
|
|
Go to Top ^ |
|
|
|
|
|
Ordering Information |
| Product Code |
Description |
| SYN-PH |
Fully Auto Conveyor Synchroniser |
| Spare Parts |
|
| EN-SYN-PHB1 |
SYN-PH Power Supply Card |
| EN-SYN-PHT1 |
SYN-PH Main Control Card |
| EN-SYN-PHLED |
SYN-PH Indicator Display Card |
| EN-SYN-PHTR |
SYN-PH Transformer P:220, S:15/0/15 |
| EN-SYN-PHT125 |
SYN-PH Power ON Switch |
| EN-ASN-311 |
Selector Switch |
| EN-XS60 |
Photo Electric Sensor |
| EN-TG48 |
Tachogenerator |
| EN-P40 |
Veneer Position Potentiometer (1-Kohm) |
| EN-P40 |
Correction Adjuster Potentiometer (1-Kohm) |
|
