|
SYN-LS Conveyor Synchroniser |
|
|
|
Main Features
|
- Synchronise between controlled-driver speed and
main-driver Speed
- Uses high precision speed control system to ensure the
veneer is always in normal position, and cause no veneer split
during high speed operation!
|
|
Go to Top ^ |
|
|
|
|
|
Introduction |
|
 SYN-LS
Conveyor Synchroniser – as it is named – is a simple but highly
innovative product that synchronised between two drivers speed.
The typical application of this system is speed synchronisation
between Dryer Input Conveyor (known as controlled-driver) and
Dryer Net (known as main-driver).
The key advantages of this system are:
- Decrease veneer split problem
- Increase machine efficiency
- Improve veneer quality
- Reduce overall production cost
|
|
Go to Top ^ |
|
|
|
|
|
Specification |
| Model |
SYN-LS |
| Power Supply |
Source Voltage |
Single phase 220 |
VAC |
| Power Rating |
120 |
Watt |
| Input |
Main Drive TG |
Voltage |
10 ~ 140V @ max.speed |
VAC/VDC |
|
Pole |
24 and above |
Pole |
| Output |
Voltage (max) |
12 |
VDC |
| Current (max) |
30 |
mA |
| Load |
Resistance |
500 (minimum) |
Ohm |
|
Controlled-Driver Motor |
Motor Type |
DC/AC/VS/DL/PS |
|
|
Speed Range |
0 ~ 65 |
m/min |
| Panel Dimension |
W x H x D |
150 x 120 x 300 |
mm |
|
|
|
|
Go to Top ^ |
|
|
|
|
|
Ordering Information |
| Product Code |
Description |
| SYN-LS |
Conveyor Synchroniser |
| Spare Parts |
|
| EN-SYN-LSB1 |
SYN-LS Power Supply Card |
| EN-SYN-LST1 |
SYN-LS Main Control Card |
| EN-SYN-LSLED |
SYN-LS Indicator Display Card |
| EN-SYN-LSTR |
SYN-LS Transformer P:220, S:15/0/15 |
| EN-SYN-LST125 |
SYN-LS Power ON Switch |
| EN-SYN-LSCA12 |
SYN-LS Limit Switch |
| EN-TG48 |
Tachogenerator |
| EN-ASN-311 |
Selector Switch |
| EN-ASN-311EN-P40 |
Correction Adjuster Potentiometer (1-Kohm) |
|
