|
EN-301 Fully Auto Rotary Synchroniser |
|
|
|
|
|
Go to Top ^ |
|
|
|
|
|
Main Features
|
- Synchronise between Rotary Lathe spindle speed and Reeling
Conveyor Speed
- Uses high precision speed control system to ensure reeled
veneer always in normal position, and cause no veneer split
during reeling even at very high speed!
|
|
Go to Top ^ |
|
|
|
|
|
Introduction |
|
 EN-301 Fully Auto Rotary Synchroniser is a high precision
speed control system that can be integrated easily into Rotary
Lathe system. Its main function is to synchronise the speed
between Rotary Lathe and Reeling Conveyor. The outstanding
advantage of this system is that while it fully controls the
reeling speed, it always maintain the desired veneer position to
avoid any veneer split problem.
Besides, EN-301 is virtually a Fully Automatic Speed Adjuster.
When there is a change in one of the synchronisation parameter,
it will automatically correct it to a new value that produces
the best synchronisation result.
Benefits of EN-301 system are:
- Decrease veneer split problem
- Increase machine efficiency
- Increase reeling ration
- Improve veneer quality
- Reduce overall production cost
|
|
Go to Top ^ |
|
|
|
|
|
Specification |
| Model |
EN-301 |
| Power Supply |
Source Voltage |
Single phase 220/380/415/440 |
VAC |
| Power Rating |
150 |
Watt |
| Input
|
Spindle TG |
Voltage |
10 ~ 140V @ max.speed |
VAC/VDC |
|
Pole |
24 and above |
Pole |
| Log Dia. Potentiometer |
Type |
High precision
(CPP-60B/CPP-45B) |
|
| 1 ~ 2K |
Ohm |
| Output |
Voltage (max) |
12 |
VDC |
| Current (max) |
30 |
mA |
| Load |
Resistance |
500 (minimum) |
Ohm |
| Reeling Conveyor Motor |
Motor Type |
DC/AC/VS/DL/PS |
|
| Speed Range |
0 ~ 300 |
m/min |
| Panel Dimension |
W x H x D |
330 x 1020 x 580 |
mm |
|
|
|
|
Go to Top ^ |
|
|
|
|
|
Ordering Information |
| Product Code |
Description |
| EN-301 |
Fully Auto Rotary Synchroniser |
| Spare Parts |
|
| EN-301-PHA2 |
EN-301-PH Controller (2-card) |
| EN-301-PHT1 |
EN-301-PH Top Card |
| EN-301-PHB1 |
EN-301-PH Bottom Card |
| EN-301-TGA2 |
EN-301-TG Controller (2-card) |
| EN-301-TGT1 |
EN-301-TG Top Card |
| EN-301-TGB1 |
EN-301-TG Bottom Card |
| EN-301-MCA3 |
EN-301-MC Controller (3-card) |
| EN-301-MCT1 |
EN-301-MC Top Card |
| EN-301-MCM1 |
EN-301-MC Middle Card |
| EN-301-MCB1 |
EN-301-MC Bottom Card |
| EN-301-DSP1 |
EN-301-DSP Card |
| EN-301-POT1 |
EN-301-POT Card |
| EN-301-CPU21 |
EN-301 PLC CPU Unit |
| EN-301-PA206 |
EN-301 PLC Power Supply Unit |
| EN-301-OC221 |
EN-301 PLC Output Unit |
| EN-301-TR220 |
EN-301 Transformer P:220/380/415/440 S:
220/0 |
| EN-301-TR18 |
EN-301 Transformer P: 220 S:18/15/0/15/18 |
| EN-CPP45B |
Log Diameter Potentiometer |
| EN-XS60 |
Photo Electric Sensor |
| EN-TG48 |
Spindle Tachogenerator |
| EN-P40 |
Veneer Position Potentiometer (1-Kohm) |
| EN-P40 |
Correction Adjuster Potentiometer (1-Kohm) |
| EN-ASN-311 |
Selector Switch |
|
